Switching Commands
159
ProSAFE M7100 Managed Switches
clear isdp counters
This command clears ISDP counters.
clear isdp table
This command clears entries in the ISDP table.
show isdp
This command displays global ISDP settings.
Format clear isdp counters
Mode Privileged EXEC
Format clear isdp table
Mode Privileged EXEC
Format show isdp
Mode Privileged EXEC
Term Definition
Timer The frequency with which this device sends ISDP packets. This value is given in seconds.
Hold Time The length of time the receiving device should save information sent by this device. This
value is giv
en in seconds.
Version 2
Adver
tisements
The setting for sending ISDPv2 packets. If disabled, version 1 packets are transmitted.
Device ID The Device ID advertised by this device. The format of this Device ID is characterized by the
value of the Devic
e ID Format object.
Device ID Format
Capabilit
y
Indicates the Device ID format capability of the device.
• serialNumber indicat
es that the device uses a serial number as the format for its Device
ID.
• macAddr
es
s indicates that the device uses a Layer 2 MAC address as the format for its
Device ID.
• o
ther indicates that the device uses its platform-specific format as the format for its
Devic
e ID.
Device ID Format Indicates the Device ID format of the device.
• serialNumber indic
at
es that the value is in the form of an ASCII string containing the
device serial number.
• macAddr
es
s indicates that the value is in the form of a Layer 2 MAC address.
• other indicates that the value is in the form of a platform-specific ASCII string containing
inf
o that identifies the device. For example, ASCII string contains serialNumber
appended/prepended with system name.
To Next Page
Loading...
