NETGEAR ProSAFE M7100-24X - Show Vlan Association Subnet; Show Vlan Association Mac

Switching Commands
60
ProSAFE M7100 Managed Switches
show vlan association subnet
This command displays the VLAN associated with a specific configured IP-Address and net mask.
If no IP address and net mask are specified, the VLAN associations of all the configured IP subnets
are displayed.
show vlan association mac
This command displays the VLAN associated with a specific configured MAC address. If no MAC
address is specified, the VLAN associations of all the configured MAC addresses are displayed.
Term Definition
Interface Valid slot and port number separated by forward slashes. It is possible to set the parameters
for all por
ts by using the selectors on the top line.
Port VLAN ID The VLAN ID that this port will assign to untagged frames or priority tagged frames received
on this port
. The value must be for an existing VLAN. The factory default is 1.
Acceptable Frame
Types
The t
ypes of frames that may be received on this port. The options are 'VLAN only' and
'Admit All'. When set to 'VLAN only', untagged frames or priority tagged frames received on
this port are discarded. When set to 'Admit All', untagged frames or priority tagged frames
received on this port are accepted and assigned the value of the Port VLAN ID for this port.
With either option, VLAN tagged frames are forwarded in accordance to the 802.1Q VLAN
specification.
Ingress Filtering May be enabled or disabled. When enabled, the frame is discarded if this port is not a
member of the VL
AN with which this fr
ame is associated. In a tagged frame, the VLAN is
identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN ID
specified for the port that received this frame. When disabled, all frames are forwarded in
accordance with the 802.1Q VLAN bridge specification. The factory default is disabled.
GVRP May be enabled or disabled.
Default Priority The 802.1p priority assigned to tagged packets arriving on the port.
Format show vlan association subnet [<ipaddr> <netmask>]
Mode Privileged EXEC
Term Definition
IP Subnet The IP address assigned to each interface.
IP Mask The subnet mask.
VLAN ID A VLAN Identifier (VID) is associated with each VLAN.
Format show vlan association mac [<macaddr>]
Mode Privileged EXEC