282
6
6. Security Commands
This chapter describes the security commands available in the managed switch CLI.
This chapter contains the following sections:
• Private VLAN Commands
• Protected Ports Commands
• Private Group Commands
• Port-Based Network Access Control Commands
• 802.1X Supplicant Commands
• Storm-Control Commands
• Static MAC Filtering Commands
• Dynamic ARP Inspection Commands
• DHCP Snooping Configuration Commands
• DHCPv6 Snooping Configuration Commands
• Port Security Commands
• Denial of Service Commands
The commands in this chapter are in three functional groups:
• Show c
ommands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. Every switch
c
ommand has a show command that displays the configuration setting.
• Clear commands clear some or all of the settings to factory defaults.
To Next Page
Loading...
