Security Commands
344
ProSAFE M7100 Managed Switches
The following CLI output is an example of the command output.
(Netgear Switch) #show ipv6 dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
show ipv6 dhcp snooping statistics
This command displays filtration statistics for DHCPv6 snooping.
The following CLI output is an example of the command output.
(Netgear Switch) #show ipv6 dhcp snooping statistics
Interface MAC Verify Client Ifc DHCP Server
Failures Mismatch Msgs Rec'd
----------- ---------- ---------- -----------
1/0/2 0 0 0
1/0/3 0 0 0
1/0/4 0 0 0
1/0/5 0 0 0
1/0/6 0 0 0
1/0/7 0 0 0
1/0/8 0 0 0
1/0/9 0 0 0
1/0/10 0 0 0
1/0/11 0 0 0
1/0/12 0 0 0
1/0/13 0 0 0
1/0/14 0 0 0
1/0/15 0 0 0
1/0/16 0 0 0
1/0/17 0 0 0
Format show ipv6 dhcp snooping statistics
Mode Privileged EXEC
Term Definition
MAC Verify
Failur
es
The number of DHCPv6 messages that were filtered on an untrusted interface because the
source MAC address and client hardware address mismatched.
Client Ifc
mismatch
The number of DHCP r
elease and reply messages that were received on different ports than
the ports on which they were learned.
DHCP Server
Msgs
The number of DHCP server messages that were received on untrusted ports.
To Next Page
Loading...
Need help?
General