Security Commands
285
ProSAFE M7100 Managed Switches
private-vlan
This command is used to configure the private VLANs and to configure the association between
the primary private VLAN and secondary VLANs.
no private-vlan
This command is used to restore normal VLAN configuration.
vlan (for private VLANs)
Use this command to enter the private vlan configuration. The VLAN range is 1-4094.
no vlan (for private VLANs)
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is
reserved for the default VLAN). The vlan-list contains VlanId's in range <1-4093>. Separate
non-consecutive IDs with ',' and no spaces and no zeros in between the range; Use '-' for range.
Format private-vlan {association [add | remove] <secondary-vlan-list> |
community | isolated | primary}
Mode VLAN Config
Term Definition
association Associates the primary and secondary VLAN.
secondary-vlan-list A list of secondary VLANs to be mapped to a primary VLAN.
community Designates a VLAN as a community VLAN.
isolated Designates a VLAN as the isolated VLAN.
primary Designates a VLAN as the primary VLAN.
Format no private-vlan {association}
Mode VLAN Config
Format vlan <vlan-list>
Mode Global Config
Format no vlan <vlan-list>
Mode VLAN Config
To Next Page
Loading...
Need help?
General