Switching Commands
41
ProSAFE M7100 Managed Switches
show spanning-tree brief
This command displays spanning tree settings for the bridge. The following information appears.
Designated Root The bridge identifier of the root bridge. It is made up from the bridge priority and the base
MAC address of the bridge.
Root Path Cost Value of the Root Path Cost parameter for the Common and Internal Spanning Tree.
Root Port
Identifier
Identifier of the port to access the Designated Root for the CST
Root Port Max
Age
Derived value.
Root Port Bridge
F
or
ward Delay
Derived value.
Hello Time Configured value of the parameter for the CST.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data Units (BPDUs).
Bridge Max Hops Bridge max-hops count for the device.
CST Regional
Ro
ot
Bridge Identifier of the CS
T Regional Root. It is made up using the bridge priority and the
base MAC address of the bridge.
Regional Root
Path C
ost
Path Cost to the CST Regional Root.
Associated FIDs List of forwarding database identifiers currently associated with this instance.
Associated VLANs List of VLAN IDs currently associated with this instance.
Format show spanning-tree brief
Mode • P
rivileged EXEC
• User EXEC
Term Definition
Bridge Priority Configured value.
Bridge Identifier The bridge identifier for the selected MST instance. It is made up using the bridge
priority and the base MA
C address of the bridge.
Bridge Max Age Configured value.
Bridge Max Hops Bridge max-hops count for the device.
Bridge Hello Time Configured value.
Bridge Forward Delay Configured value.
Bridge Hold Time Minimum time between transmission of Configuration Bridge Protocol Data Units
(BPDUs).
Term Definition
To Next Page
Loading...
Need help?
General