Switching Commands
27
ProSAFE M7100 Managed Switches
show port protocol
This command displays the Protocol-Based VLAN information for either the entire system, or for
the indicated group.
show port description
This command displays the port description for every port.
show port status
This command displays the Protocol-Based VLAN information for either the entire system, or for
the indicated group.
Link Trap This object determines whether to send a trap when link status changes. The factory
default is enabled.
LACP Mode LACP is enabled or disabled on this port.
Format show port protocol {<groupid> | all}
Mode Privileged EXEC
Term Definition
Group Name The group name of an entry in the Protocol-based VLAN table.
Group ID The group identifier of the protocol group.
Protocol(s) The type of protocol(s) for this group.
VLAN The VLAN associated with this Protocol Group.
Interface(s) Lists the slot/port interface(s) that are associated with this Protocol Group.
Format show port description <slot/port>
Mode Privileged EXEC
Term Definition
Interface Valid slot and port number separated by forward slashes
Description Shows the port description configured via the “description” command
Format show port status {<slot/port> | all}
Mode Privileged EXEC
Term Definition
To Next Page
Loading...
