Security Commands
303
ProSAFE M7100 Managed Switches
If you use the optional parameter statistics <slot/port>, the following dot1x statistics
for the specified port appear.
show dot1x clients
This command displays 802.1x client information. This command also displays information about
the number of clients that are authenticated using Monitor mode and using 802.1X.
Term Definition
Port The interface whose statistics are displayed.
EAPOL Frames
Rec
eived
The number of valid EAPOL frames of any type that have been received by this
authenticator.
EAPOL Frames
Tr
ansmitted
The number of EAPOL frames of any type that have been transmitted by this authenticator.
EAPOL Start
Fr
ames Received
The number of EAPOL start frames that have been received by this authenticator.
EAPOL Logoff
Fr
ames Received
The number of EAPOL logoff frames that have been received by this authenticator.
Last EAPOL
Fr
ame Version
The protocol version number carried in the most recently received EAPOL frame.
Last EAPOL
Fr
ame Source
The source MAC address carried in the most recently received EAPOL frame.
EAP Response/Id
Fr
ames Received
The number of EAP response/identity frames that have been received by this authenticator.
EAP Response
Fr
ames Received
The number of valid EAP response frames (other than resp/id frames) that have been
received by this authenticator.
EAP Request/Id
Fr
ames
Transmitted
The number of EAP request/identity frames that have been transmitted by this
authenticator.
EAP Request
F
r
ames
Transmitted
The number of EAP request frames (other than request/identity frames) that have been
transmitted by this authenticator.
Invalid EAPOL
F
r
ames Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
EAP Length Error
Fr
ames Received
The number of EAPOL frames that have been received by this authenticator in which the
frame type is not recognized.
Format show dot1x clients {<slot/port> | all}
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General