NETGEAR ProSAFE M7100-24X - Port-Security Max-Static; Port-Security Mac-Address; Port-Security Mac-Address Move

Security Commands
349
ProSAFE M7100 Managed Switches
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed on a
specific port t
o its default value.
port-security max-static
This command sets the maximum number of statically locked MAC addresses allowed on a port .
no port-security max-static
This command sets maximum number of statically locked MAC addresses to the default value.
port-security mac-address
This command adds a MAC address to the list of statically locked MAC addresses. The <vid> is
the VLAN ID.
no port-security mac-address
This command removes a MAC address from the list of statically locked MAC addresses.
port-security mac-address move
This command converts dynamically locked MAC addresses to statically locked addresses.
Format no port-security max-dynamic
Mode Interface Config
Default 20
Format port-security max-static <maxvalue>
Mode Interface Config
Format no port-security max-static
Mode Interface Config
Format port-security mac-address <mac-address> <vid>
Mode Interface Config
Format no port-security mac-address <mac-address> <vid>
Mode Interface Config
Format port-security mac-address move
Mode Interface Config