Utility Commands
372
ProSAFE M7100 Managed Switches
The display parameters, when the argument is switchport are as follows:
show interface counters
This command reports key summary statistics for all ports (physical, CPU, and port-channel).
Collisions Frames The best estimate of the total number of collisions on this Ethernet segment.
Time Since
Count
ers Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were
last cleared.
Term Definition
Packets Received
Without Err
or
The total number of packets (including broadcast packets and multicast packets) received by
the processor.
Broadcast
Pack
ets Received
The total number of packets received that were directed to the broadcast address. Note that
this does not include multicast packets.
Packets Received
With Err
or
The number of inbound packets that contained errors preventing them from being
deliverable to a higher-layer protocol.
Packets
Tr
ansmitted
Without Error
The total number of packets transmitted out of the interface.
Broadcast
Pack
ets
Transmitted
The total number of packets that higher-level protocols requested to be transmitted to the
Broadcast address, including those that were discarded or not sent.
Transmit Packet
Er
r
ors
The number of outbound packets that could not be transmitted because of errors.
Address Entries
Cur
rently In Use
The total number of Forwarding Database Address table entries now active on the switch,
including learned and static entries.
VLAN Entries
Cur
rently In Use
The number of VLAN entries presently occupying the VLAN table.
Time Since
Count
ers Last
Cleared
The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch
were last cleared.
Format show interface counters
Mode Privileged EXEC
Parameters Definition
To Next Page
Loading...
Need help?
General