NETGEAR ProSAFE M7100-24X Reference Manual

Utility Commands
454
ProSAFE M7100 Managed Switches
no debug ip pimsm packet
Use this command to disable debug tracing of PIMSM packet reception or transmission.
debug ip vrrp
Use this command to enable VRRP debug protocol messages.
no debug ip vrrp
Use this command to disable VRRP debug protocol messages.
debug ipv6 dhcp
Use this command to display “debug” information about DHCPv6 client activities and trace
DHCPv6 packets to and from the local DHCPv6 client.
no ipv6 debug dhcp
Use this command to disable the display of “debug” trace output for DHCPv6 client activity.
Default disabled
Format debug ip pimsm packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip pimsm packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip vrrp
Mode Privileged EXEC
Format no debug ip vrrp
Mode Privileged EXEC
Default disabled
Format debug ipv6 dhcp
Mode Privileged EXEC
Format no debug ipv6 dhcp
Mode Privileged EXEC

NETGEAR ProSAFE M7100-24X Specifications

General

Brand	NETGEAR
Model	ProSAFE M7100-24X
Category	Switch
Language	English