Switching Commands
88
ProSAFE M7100 Managed Switches
port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical slot/port for
a configured port-channel, and <name> is an alphanumeric string up to 15 characters.
port-channel system priority
Use this command t
o configur
e por
t-channel sy
st
em priority. The valid r
ange of <priorit
y> is
0-65535.
no port-channel system priority
Use this command to configure the default port-channel system priority value.
show lacp actor
Use this command to display LACP actor attributes.
The following output parameters are displayed.
Format port-channel name {<logical slot/port> | <name>}
Mode Global Config
Default 0x8000
Format port-channel system priority <priority>
Mode Global Config
Format no port-channel system priority
Mode Global Config
Format show lacp actor {<slot/port> | all}
Mode Global Config
Parameter Description
System Priority The system priority assigned to the Aggregation Port.
Admin Key The administrative value of the Key.
Port Priority The priority value assigned to the Aggregation Port.
Admin State The administrative values of the actor state as transmitted by the Actor in LACPDUs.
To Next Page
Loading...
Need help?
General