NETGEAR ProSAFE M7100-24X - Clear Logging Buffered; Clear Counters; Clear Igmpsnooping; Clear Mac-Addr-Table

Utility Commands
405
ProSAFE M7100 Managed Switches
clear mac-addr-table
This command clears the dynamically learned MAC addresses of the switch.
clear logging buffered
This command clears the messages maintained in the system log.
clear counters
This command clears the statistics for a specified <slot/port>, for all the ports, or for the
entire switch based upon the argument.
clear igmpsnooping
This command clears the tables managed by the IGMP Snooping function and attempts to delete
these entries from the Multicast Forwarding Database.
clear pass
This command resets all user passwords to the factory defaults without powering off the switch.
You are prompted to confirm that the password reset should proceed.
clear port-channel
This command clears all port-channels (LAGs).
Format clear mac-addr-table
Mode Privileged EXEC
Format clear logging buffered
Mode Privileged EXEC
Format clear counters {<slot/port> | all}
Mode Privileged EXEC
Format clear igmpsnooping
Mode Privileged EXEC
Format clear pass
Mode Privileged EXEC
Format clear port-channel
Mode Privileged EXEC