NETGEAR ProSAFE M7100-24X - Management Security Commands; Crypto Certificate Generate; Crypto Key Generate Rsa; Crypto Key Generate Dsa

Management Commands
509
ProSAFE M7100 Managed Switches
Management Security Commands
This section describes commands you use to generate keys and certificates, which you can do in
addition to loading them as before.
crypto certificate generate
Use this command to generate self-signed certificate for HTTPS. The generate RSA key for SSL
has a length of 1024 bits. The resulting certificate is generated with a common name equal to the
lowest IP address of the device and a duration of 365 days.
no crypto certificate generate
Use this command to delete the HTTPS certificate files from the device, regardless of whether
they ar
e self-signed or downloaded from an outside source.
crypto key generate rsa
Use this command to generate an RSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded RSA key files.
no crypto key generate rsa
Use this command to delete the RSA key files from the device.
crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any
existing generated or downloaded DSA key files.
Format crypto certificate generate
Mode Global Config
Format no crypto certificate generate
Mode Global Config
Format crypto key generate rsa
Mode Global Config
Format no crypto key generate rsa
Mode Global Config
Format crypto key generate dsa
Mode Global Config