Routing Commands
209
ProSAFE M7100 Managed Switches
no bootpdhcprelay maxhopcount
This command configures the default maximum allowable relay agent hops for BootP/DHCP
Relay on the s
ystem.
bootpdhcprelay minwaittime
This command configures the minimum wait time in seconds for BootP/DHCP Relay on the
system. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the
seconds-since-client-began-booting field of the request as a factor in deciding whether to relay
the request or not. The parameter has a range of 0–100 seconds.
no bootpdhcprelay minwaittime
This command configures the default minimum wait time in seconds for BootP/DHCP Relay on
the sy
stem.
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format no bootpdhcprelay maxhopcount
Mode Global Config
Default 0
Format bootpdhcprelay minwaittime <0-100>
Mode Global Config
Format no bootpdhcprelay minwaittime
Mode Global Config
Format show bootpdhcprelay
Modes • P
rivileged EXEC
• User EXEC
Term Definition
Maximum Hop
Count
The maximum allow
able relay agent hops.
Minimum Wait
Time (Sec
onds)
The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP Address The IP address for the BootP/DHCP Relay server.
To Next Page
Loading...
Need help?
General