Security Commands
335
ProSAFE M7100 Managed Switches
The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000
show ip dhcp snooping interfaces
Use this command to show the DHCP Snooping status of the interfaces.
show ip dhcp snooping statistics
Use this command to list statistics for DHCP Snooping security violations on untrusted ports.
Term Definition
Agent URL Bindings database agent URL.
Write Delay The maximum write time to write the database into local or remote.
Format show ip dhcp snooping interfaces
Mode Privileged EXEC
Format show ip dhcp snooping statistics
Mode • Privileged EXEC
• User EXEC
Term Definition
Interface The IP address of the interface in slot/port format.
MAC Verify
Failur
es
Represents the number of DHCP messages that were filtered on an untrusted interface
because of source MAC address and client HW address mismatch.
Client Ifc
Mismatch
R
epresents the number of DHCP release and Deny messages received on the different ports
than learned previously.
DHCP Server
Msgs Rec
’d
Represents the number of DHCP server messages received on Untrusted ports.
To Next Page
Loading...
