NETGEAR ProSAFE M7100-24X - Clear Ip Dhcp Snooping Binding; Clear Ip Dhcp Snooping Statistics

Security Commands
336
ProSAFE M7100 Managed Switches
The following shows example CLI display output for the command.
(switch) #show ip dhcp snooping statistics
Interface MAC Verify Client Ifc DHCP Server
Failures Mismatch Msgs Rec'd
----------- ---------- ---------- -----------
0/2 0 0 0
0/3 0 0 0
0/4 0 0 0
0/5 0 0 0
0/6 0 0 0
0/7 0 0 0
0/8 0 0 0
0/9 0 0 0
0/10 0 0 0
0/11 0 0 0
0/12 0 0 0
0/13 0 0 0
0/14 0 0 0
0/15 0 0 0
0/16 0 0 0
0/17 0 0 0
0/18 0 0 0
0/19 0 0 0
0/20 0 0 0
clear ip dhcp snooping binding
Use this command to clear all DHCP Snooping bindings on all interfaces or on a specific interface.
clear ip dhcp snooping statistics
Use this command to clear all DHCP Snooping statistics.
Format clear ip dhcp snooping binding [interface <slot/port>]
Mode • Privileged EXEC
• User EXEC
F
ormat clear ip dhcp snooping statistics
Mode • Privileged EXEC
• User EXEC