Switching Commands
118
ProSAFE M7100 Managed Switches
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
show igmpsnooping ssm entries
This command displays the source specific multicast forwarding database (SSMFDB) that is built
by IGMP snooping.
Format show igmpsnooping mrouter vlan <slot/port>
Mode Privileged EXEC
Term Definition
Interface The port on which multicast router information is being displayed.
VLAN ID The list of VLANs of which the interface is a member.
Format show igmpsnooping ssm entries
Mode Privileged EXEC
Term Definition
VLAN The VLAN on which the database entry is learned.
Group The IPv4 multicast group address.
Source The IPv4 source address.
Source Filter
Mode
The source filter mode (Include or Exclude) for the specified group.
To Next Page
Loading...
Need help?
General