Utility Commands
420
ProSAFE M7100 Managed Switches
show sntp client
This command is used to display SNTP client settings.
show sntp server
This command is used to display SNTP server settings and configured servers.
Term Definition
Last Update Time Time of last clock update.
Last Unicast
Att
empt Time
Time of last transmit query (in unicast mode).
Last Attempt
St
atus
Status of the last SNTP request (in unicast mode) or unsolicited message (in broadcast
mode).
Broadcast Count Current number of unsolicited broadcast messages that have been received and processed
by the SNTP client since las
t reboot.
Multicast Count Current number of unsolicited multicast messages that have been received and processed by
the SNTP client since las
t reboot.
Format show sntp client
Mode Privileged EXEC
Term Definition
Client Supported
Modes
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
SNTP Version The highest SNTP version the client supports.
Port SNTP Client Port.
Client Mode Configured SNTP Client Mode.
Format show sntp server
Mode Privileged EXEC
Term Definition
Server Host
Addres
s
IP address or hostname of configured SNTP Server.
Server Type Address Type of Server.
Server Stratum Claimed stratum of the server for the last received valid packet.
To Next Page
Loading...
