Log Messages
606
ProSAFE M7100 Managed Switches
Routing and IPv6 Routing
Table 45. DHCP Relay Log Messages
Component Message Cause
DHCP relay REQUEST hops field more than config value The DHCP relay agent has processed a DHCP
reques
t whose HOPS field is larger than the
maximum value allowed. The relay agent will
not forward a message with a hop count
greater than 4.
DHCP relay Request's seconds field less than the config
v
alue
The DHCP r
elay agent has processed a DHCP
request whose SECS field is larger than the
configured minimum wait time allowed.
DHCP relay processDhcpPacket: invalid DHCP packet
t
ype: %u\n
The DHCP r
elay agent has processed an
invalid DHCP packet. Such packets are
discarded by the relay agent.
Table 46. OSPFv2 Log Messages
Component Message Cause
OSPFv2 Best route client deregistration failed for
OSPF Redis
t
OSPFv2 registers with the IPv4 routing table
manager (“RTO”) to be notified of best route
changes. There are cases where OSPFv2
deregisters more than once, causing the
second deregistration to fail. The failure is
harmless.
OSPFv2 XX_Call() failure in _checkTimers for thread
0x869bc
c0
An OSPFv2 timer has fir
ed but the message
queue that holds the event has filled up. This
is normally a fatal error.
OSPFv2 Warning: OSPF LSDB is 90% full (22648
L
SA
s).
OSPFv2 limits the number of Link State
Advertisements (LSAs) that can be stored in
the link state database (LSDB). When the
database becomes 90 or 95 percent full,
OSPFv2 logs this warning. The warning
includes the current size of the database.
OSPFv2 The number of LSAs, 25165, in the OSPF
L
SDB has e
xceeded the LSDB memory
allocation.
When the OSPFv2 LSDB becomes full,
OSPFv2 logs this message. OSPFv2
reoriginates its router LSAs with the metric
of all nonstub links set to the maximum value
to encourage other routers to not compute
routes through the overloaded router.
To Next Page
Loading...
Need help?
General