Management Commands
507
ProSAFE M7100 Managed Switches
ip ssh protocol
Use this command to set or remove protocol levels (or versions) for SSH. Either SSH1 (1), SSH2
(2), or both SSH 1 and SSH 2 (1 and 2) can be set.
ip ssh server enable
Use this command to enable the IP secure shell server.
no ip ssh server enable
Use this command to disable the IP secure shell server.
sshcon maxsessions
Use this command to specify the maximum number of SSH connection sessions that can be
established. A value of 0 indicates that no ssh connection can be established. The range is 0–5.
no sshcon maxsessions
Use this command to set the maximum number of allowed SSH connection sessions to the default
value.
Default 1 and 2
Format ip ssh protocol [1] [2]
Mode Privileged EXEC
Default disabled
Format ip ssh server enable
Mode Privileged EXEC
Format no ip ssh server enable
Mode Privileged EXEC
Default 5
Format sshcon maxsessions <0-5>
Mode Privileged EXEC
Format no sshcon maxsessions
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General