Utility Commands
492
ProSAFE M7100 Managed Switches
show exception
This command displays the configuration parameters for generating a core dump file.
Format show exception
Mode Privileged EXEC
Term Description
Protocol The configured protocol, which is usb or none.
USB mount point The USB mount point configuration.
Core File name
pr
efix
The c
ore file prefix configuration.
Hostname The host name, if the core file name is configured to contain the host name.
Timestamp The time stamp, if the core file name is configured to contain the time stamp.
Switch Chip
R
egis
ter Dump
The status of the chip register dump of a switch.
To Next Page
Loading...
