NETGEAR ProSAFE M7100-24X - Show Lldp Interface; Show Lldp Statistics

Switching Commands
140
ProSAFE M7100 Managed Switches
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface
or for all interfaces.
show lldp statistics
Use this command to display the current LLDP traffic and remote table statistics for a specific
interface or for all interfaces.
Re-initialization
Delay
The delay before re-initialization, in seconds.
Notification
Inter
val
How frequently the system sends remote data change notifications, in seconds.
Format show lldp interface {<slot/port> | all}
Mode Privileged Exec
Term Definition
Interface The interface in a slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0
(P
or
t Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system management address information in the
LLDPDUs.
Format show lldp statistics {<slot/port> | all}
Mode Privileged Exec
Term Definition
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and
seconds.
T
otal Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Term Definition