Utility Commands
387
ProSAFE M7100 Managed Switches
show sysinfo
This command displays switch information.
show tech-support
Use this command to display system and configuration information when you contact technical
support. The output of this command combines the output of the following commands:
• show version
• show sysinfo
• show port all
• show isdp neighbors
• show logging
• show ev
ent log
• show logging buff
ered
• show trap log
Format show sysinfo
Mode Privileged EXEC
Term Definition
Switch
Description
Text used to identify this switch.
System Name Name used to identify the switch. The factory default is blank. To configure the system
name, see snmp-server on page 541.
System Location Text used to identify the location of the switch. The factory default is blank. To configure the
s
y
stem location, see snmp-server on page 541.
System Contact Text used to identify a contact person for this switch. The factory default is blank. To
configur
e the system location, see snmp-server on page 541.
System Object ID The base object ID for the switch’s enterprise MIB.
System Up Time The time in days, hours, and minutes since the last switch reboot.
MIBs Supported A list of MIBs supported by this agent.
Format show tech-support
Mode Privileged EXEC
To Next Page
Loading...
