NETGEAR ProSAFE M7100-24X - Show Lldp Med Remote-Device Detail

Switching Commands
153
ProSAFE M7100 Managed Switches
show lldp med remote-device detail
Use this command to display detailed information about remote devices that transmit current
LLDP MED data to an interface on the system.
Format show lldp med remote-device detail <slot/port>
Mode Privileged EXEC
Term Definition
Supported
Capabilities
Shows the suppor
ted capabilities that were received in MED TLV on this port.
Enabled
capabilities
Shows the enabled c
apabilities that were enabled in MED TLV on this port.
Device Class Shows the device class as advertised by the device remotely connected to the port.
Network Policy
Inf
ormation
Shows if ne
twork policy TLV is received in the LLDP frames on this port.
Media Application
Type
Shows the applic
ation type. Types of applications are unknown, voice, voicesignaling,
guestvoice, guestvoicesignaling, sfotphonevoice, videoconferencing, streamingvideo,
videosignaling.
VLAN Id Shows the VLAN id associated with a particular policy type.
Priority Shows the priority associated with a particular policy type.
DSCP Shows the DSCP associated with a particular policy type.
Unknown Indicates if the policy type is unknown. In this case, the VLAN id, Priority and DSCP are
ignor
ed.
T
agged Indicates if the policy type is using tagged or untagged VLAN.
Hardware
R
evision
Shows the har
dware version of the remote device.
Firmware
Revision
Shows the firmw
are version of the remote device.
Software Revision Shows the software version of the remote device.
Serial Number Shows the serial number of the remote device.
Manufacturer
Name
Shows the manufacture name of the remote device.
Model Name Shows the model name of the remote device.
Asset ID Shows the asset id of the remote device.
Sub Type Shows the type of location information.
Location
Inf
ormation
Shows the location information as a string for a given type of location id