Switching Commands
59
ProSAFE M7100 Managed Switches
show vlan internal usage
This command displays information about the VLAN ID allocation on the switch.
show vlan port
This command displays VLAN port information.
Current The degree of participation of this port in this VLAN. The permissible values are:
• Include - This port is alw
ays a member of this VLAN. This is equivalent to registration
fixed in the IEEE 802.1Q standard.
• Ex
clude - This port is never a member of this VLAN. This is equivalent to registration
f
orbidden in the IEEE 802.1Q standard.
• A
utodetect - To allow the port to be dynamically registered in this VLAN via GVRP. The
por
t will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Configured The configured degree of participation of this port in this VLAN. The permissible values are:
• Include - This por
t is alw
ays a member of this VLAN. This is equivalent to registration
fixed in the IEEE 802.1Q standard.
• Ex
clude - This port is never a member of this VLAN. This is equivalent to registration
f
orbidden in the IEEE 802.1Q standard.
• A
utodetect - To allow the port to be dynamically registered in this VLAN via GVRP. The
por
t will not participate in this VLAN unless a join request is received on this port. This is
equivalent to registration normal in the IEEE 802.1Q standard.
Tagging The tagging behavior for this port in this VLAN.
• T
agged - Transmit traffic for this VLAN as tagged frames.
• Untagged - Transmit traffic for this VLAN as untagged frames.
F
ormat show vlan internal usage
Mode • P
rivileged EXEC
• User EXEC
Term Definition
Base VLAN ID Identifies the base VLAN ID for internal allocation of VLANs to the routing interface.
Allocation policy Identifies whether the system allocates VLAN IDs in ascending or descending order.
Format show vlan port {<slot/port> | all}
Mode • Privileged EXEC
• User EXEC
Term Definition
To Next Page
Loading...
