Utility Commands
483
ProSAFE M7100 Managed Switches
Example:
(Switch) # show rmon log
Maximum table size: 100
Event Description Time
------------------------------------------------
show rmon statistics interface
This command displays the RMON statistics for the given interface.
Example:
(switch) # show rmon statistics interface 0/1
Interface: 0/1
Dropped: 0
Octets: 0 Packets: 0
Broadcast: 0 Multicast: 0
CRC Align Errors: 0 Collisions: 0
Undersize Pkts: 0 Oversize Pkts: 0
Fragments: 0 Jabbers: 0
64 Octets: 0 65 - 127 Octets: 0
128 - 255 Octets: 0 256 - 511 Octets: 0
512 - 1023 Octets: 0 1024 - 1518 Octets: 0
UDLD Commands
The UDLD feature detects unidirectional links physical ports. A unidirectional link is a forwarding
anomaly in a Layer 2 communication channel in which a bi-directional link stops passing traffic in
one direction. UDLD must be enabled on both sides of the link in order to detect a unidirectional
link. The UDLD protocol operates by exchanging packets containing information about
neighboring devices.
udld enable
This command enables UDLD globally on the switch.
Format show rmon statistics interface <slot/port>
Mode Privileged Exec
Default disabled
Format udld enable
Mode Global Config
To Next Page
Loading...
Need help?
General