NETGEAR ProSAFE M7100-24X - Macfilter Addsrc; Macfilter Addsrc All

Security Commands
320
ProSAFE M7100 Managed Switches
no macfilter adddest all
This command removes all ports from the destination filter set for the MAC filter with the given
<macaddr> and VLAN of
<vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must
identify a valid VLAN.
macfilter addsrc
This command adds the interface to the source filter set for the MAC filter with the MAC address
of <macaddr> and VLAN of <vlanid>. The <macaddr> parameter must be specified as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must
identify a valid VLAN.
no macfilter addsrc
This command removes a port from the source filter set for the MAC filter with the MAC address
of <macaddr> and VL
AN of
<vlanid>. The <macaddr> parameter must be specified as a
6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter
must identify a valid VLAN.
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address
of <macaddr> and <vlanid>. You must specify the <macaddr> parameter as a 6-byte
hexadecimal number in the format of b1:b2:b3:b4:b5:b6. The <vlanid> parameter must
identify a valid VLAN.
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC
addr
es
s of <macaddr> and VLAN of <vlanid>. You must specify the <macaddr> parameter
as a 6-byte hexadecimal number in the format of b1:b2:b3:b4:b5:b6.
Format no macfilter adddest all <macaddr> <vlanid>
Mode Global Config
Format macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
Format no macfilter addsrc <macaddr> <vlanid>
Mode Interface Config
Format macfilter addsrc all <macaddr> <vlanid>
Mode Global Config