NETGEAR ProSAFE M7100-24X - Debug Arp; Debug Aaa Authorization; Debug Auto-Voip

Utility Commands
444
ProSAFE M7100 Managed Switches
debug aaa authorization
This command is useful for debugging authorization configuration and functionality in User
Manager.
no debug aaa authorization
Use this command to turn off debugging of User Manager authorization functionality.
debug arp
Use this command to enable ARP debug protocol messages.
no debug arp
Use this command to disable ARP debug protocol messages.
debug auto-voip
Use this command to enable Auto VOIP debug messages. Use the optional parameters to trace
H323, SCCP, or SIP packets respectively.
Format debug aaa authorization [commands | exec]
Mode Privileged EXEC
Format no debug aaa authorization
Mode Privileged EXEC
Default disabled
Format debug arp
Mode Privileged EXEC
Format no debug arp
Mode Privileged EXEC
Default disabled
Format debug auto-voip [H323 | SCCP | SIP]
Mode Privileged EXEC