EasyManuals Logo

NETGEAR ProSAFE M7100-24X Reference Manual

NETGEAR ProSAFE M7100-24X
636 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #478 background imageLoading...
Page #478 background image
Utility Commands
478
ProSAFE M7100 Managed Switches
RFC 3434
• Group 1 - High Capacity Alarm Control Group
Controls the configuration of alarms for high capacity MIB object instances.
• Group 2 - High Capacity Alarm Capabilities Group
Describes the high c
apacity alarm capabilities provided by the agent.
• Group 3 - High Capacity Alarm Notifications Group
P
rovides new rising and falling threshold notifications for high capacity objects.
rmon alarm
This command sets the RMON alarm entry in the RMON alarm MIB group.
Format rmon alarm <alarm number> <variable> <sample interval> {absolute
|delta} rising-threshold <value> [<rising-event-index>]
falling-threshold <value> [<falling-event-index>] [startup {rising |
falling | rising-falling}] [owner <string>]
Mode Global Config
Parameter Description
Alarm Number The alarm number which identifies an alarm.
Alarm Variable The object identifier of the particular variable to be sampled. Only variables that resolve
to an ASN.1 primitiv
e type of integer.
Sample Interval The interval in seconds over which the data is sampled and compared with the rising and
falling thr
esholds. The range is 0 to 2147483647. The default is 0.
Alarm Sample Type The alarm sample type. The method of sampling the selected variable and calculating the
value t
o be compared against thresholds. Possible types are absolute and delta.
Alarm Rising
Threshold V
alue
The alarm rising threshold for the sample statistics.
Alarm Rising Event
Index
The inde
x of the event entry that is used when a rising threshold is crossed. The range is 1
to 65535. The default is 1.
Alarm Falling
Threshold V
alue
The alarm falling threshold for the sample statistics.
Alarm Falling Event
Index
The inde
x of the event entry that is used when a falling threshold is crossed. The range is
1 to 65535. The default is 2.
Rising/Falling/
Rising-Falling
The alarm that might be sent
. Possible values are rising alarm (rising), falling alarm
(falling), or both (rising-falling).
Alarm Owner string The alarm owner. The owner string associated with the alarm entry.

Table of Contents

Other manuals for NETGEAR ProSAFE M7100-24X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR ProSAFE M7100-24X and is the answer not in the manual?

NETGEAR ProSAFE M7100-24X Specifications

General IconGeneral
BrandNETGEAR
ModelProSAFE M7100-24X
CategorySwitch
LanguageEnglish

Related product manuals