Utility Commands
443
ProSAFE M7100 Managed Switches
no capture line wrap
Use this command to disable the capture line wrap mode.
show capture packets
Use this command to display packets captured and saved to RAM. It is possible to capture and
save into RAM, packets that are received or transmitted through the CPU. A maximum 128
packets can be saved into RAM per capturing session. A maximum 128 bytes per packet can be
saved into the RAM. If a packet holds more than 128 bytes, only the first 128 bytes are saved;
data more than 128 bytes is skipped and cannot be displayed in the CLI.
Capturing packets is stopped automatically when 128 packets are captured and have not yet
been displayed during a c
aptur
e session. Captured packets are not retained after a reload cycle.
Serviceability Packet Tracing Commands
These commands improve the capability of network engineers to diagnose conditions affecting
their managed switch product.
CAUTION:
The output of the debug commands can be long and might adversely affect
system performance.
debug aaa accounting
This command is useful for debugging accounting configuration and functionality in User
Manager.
no debug aaa accounting
Use this command to turn off debugging of User Manager accounting functionality.
Format no capture line wrap
Mode Global Config
Format show capture packets
Mode Privileged EXEC
Format debug aaa accounting
Mode Privileged EXEC
Format no debug aaa accounting
Mode Privileged EXEC
To Next Page
Loading...
