Switching Commands
145
ProSAFE M7100 Managed Switches
LLDP-MED Commands
Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057)
provides an extension to the LLDP standard. Specifically, LLDP-MED provides extensions for
network configuration and policy, device location, Power over Ethernet (PoE) management and
inventory management.
lldp med
Use this command to enable MED. By enabling MED, you will be effectively enabling the transmit
and receive function of LLDP.
no lldp med
Use this command to disable MED.
lldp med confignotification
Use this command to configure all the ports to send the topology change notification.
no ldp med confignotification
Use this command to disable notifications.
Default enabled
Format lldp med
Mode Interface Config
Format no lldp med
Mode Interface Config
Default enabled
Format lldp med confignotification
Mode Interface Config
Format no lldp med confignotification
Mode Interface Config
To Next Page
Loading...
Need help?
General