Management Commands
530
ProSAFE M7100 Managed Switches
Note: The local user database is checked. This has the same effect as the
following command: aaa authentication login local.
no aaa authentication login
Use this command to remove authentication at login.
aaa authentication enable
Use this command to set authentication for accessing higher privilege levels.
The default and optional list names that you can create with the aaa authentication
enable command ar
e used with the enable authentication command. Create a list by
entering the aaa authentication enable <list-name> <method> command, in
which the <list-name> argument is a character string used to name this list. The <method>
argument identifies the list of methods that the authentication algorithm tries in the given
sequence. You can use more than one <method> argument .
The default name for the <list-name> ar
gument is enableLis
t. This list is used for console
access and uses the enable keyword for the <method1> argument followed by the none
keyword for the <method2> argument.
If no password is configured for the enable and line methods, the authentic
ation returns
ERROR (not PASS or FAIL) and moves to the next configured method in the authentication list.
The none method reflects that authentication is not required.
All requests that are sent by the switch to a RADIUS or TACACS server as part of the aaa
authentication enable default command include the user name $enabx$
, in which
x
is the requested privilege level.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS servers for authentication.
Format no aaa authentication login {default | <list-name>}
Mode Global Config
Default • The def
ault name for the <
list-name> argument is enableList.
• The default keyword the <
method1> argument is enable.
• The default keyword the <
method2> argument is none.
Format aaa authentication enable {default | <list-name>} <method1>
[<method2> ...]
Mode Global Config
Keyword Description
To Next Page
Loading...
