Utility Commands
455
ProSAFE M7100 Managed Switches
debug ipv6 mcache packet
Use this command for tracing MDATAv6 packet reception and transmission. receive traces only
received data packets and transmit traces only transmitted data packets. When neither keyword
is used in the command, then all data packet traces are dumped. Vital information such as source
address, destination address, packet length, and the interface on which the packet is received or
transmitted is displayed on the console.
no debug ipv6 mcache packet
Use this command to disable debug tracing of MDATAv6 packet reception and transmission.
debug ipv6 mld packet
Use this command to trace MLDv6 packet reception and transmission. receive traces only
received MLDv6 packets and transmit traces only transmitted MLDv6 packets. When neither
keyword is used in the command, then all MLDv6 packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface
on which the packet is received or transmitted is displayed on the console.
no debug ipv6 mld packet
Use this command to disable debug tracing of MLDv6 packet reception and transmission.
debug ipv6 pimdm packet
Use this command to trace PIMDMv6 packet reception and transmission. receive traces only
received PIMDMv6 packets and transmit traces only transmitted PIMDMv6 packets. When
neither keyword is used in the command, then all PIMDMv6 packet traces are dumped. Vital
information such as source address, destination address, control packet type, packet length, and
the interface on which the packet is received or transmitted is displayed on the console.
Default disabled
Format debug ipv6 mcache packet [receive | transmit]
Mode Privileged EXEC
Format no debug ipv6 mcache packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ipv6 mld packet [receive | transmit]
Mode Privileged EXEC
Format no debug ipv6 mld packet [receive | transmit]
Mode Privileged EXEC
To Next Page
Loading...
