Management Commands
535
ProSAFE M7100 Managed Switches
The following shows the CLI display output for the command:
(switch) #show accounting
Number of Accounting Notifications sent at beginning of an EXEC session:
Errors when sending Accounting Notifications beginning of an EXEC session:
Number of Accounting Notifications at end of an EXEC session:
Errors when sending Accounting Notifications at end of an EXEC session:
Number of Accounting Notifications sent at beginning of a command execution:
Errors when sending Accounting Notifications at beginning of a command execution:
Number of Accounting Notifications sent at end of a command execution:
Errors when sending Accounting Notifications at end of a command execution:
show accounting methods
This command displays the configured accounting method lists.
Example:
(switch) #
(switch) #show accounting methods
Acct Type Method Name Record Type Method Type
---------- ------------ ------------ ------------
Exec dfltExecList start-stop TACACS
Commands dfltCmdsList stop-only TACACS
Commands UserCmdAudit start-stop TACACS
Line EXEC Method List Command Method List
--------- -------------------- --------------------
Console none none
Telnet none none
SSH none none
HTTPS none none
HTTP none none
clear accounting statistics
This command clears the accounting statistics.
Format show accounting methods
Mode Privileged EXEC
Format clear accounting statistics
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General