Utility Commands
459
ProSAFE M7100 Managed Switches
LS_REQ packet field definitions.
LS_UPD packet field definitions.
LS_ACK packet field definitions.
no debug ospf packet
This command disables tracing of OSPF packets.
debug ipv6 ospfv3 packet
Use this command to enable OSPFv3 packet debug trace.
Flags Could be one or more of the following:
• I – Init
• M – Mor
e
• MS
– Master/Slave
Seq Sequenc
e Number of the DD packet.
Field Definition
Length Length of packet
Field Definition
Length Length of packet
Field Definition
Length Length of packet
Format no debug ospf packet
Mode Privileged EXEC
Default disabled
Format debug ipv6 ospfv3 packet
Mode Privileged EXEC
Field Definition
To Next Page
Loading...
