NETGEAR ProSAFE M7100-24X - Show Ipv6 Source Binding

Security Commands
347
ProSAFE M7100 Managed Switches
The following CLI output is an example of the command output.
(Netgear Switch) #show ipv6 verify source
Interface Filter Type IPv6 Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
0/1 ipv6-mac 2000::1/64 00:02:B3:06:60:80 10
0/1 ipv6-mac 3000::1/64 00:0F:FE:00:13:04 10
show ipv6 source binding
This command displays the bindings for the IPv6 Source Guard feature.
The following CLI output is an example of the command output.
(Netgear Switch) #show ipv6 source binding
MAC Address IPv6 Address Type Vlan Interface
----------------- --------------- ------------- ----- -------------
00:00:00:00:00:08 2000::1 dhcp-snooping 2 1/0/1
00:00:00:00:00:09 3000::1 dhcp-snooping 3 1/0/1
00:00:00:00:00:0A 4000::1 dhcp-snooping 4 1/0/1
Term Definition
Interface The interface for which the DHCPv6 snooping filter and binding is displayed.
Filter Type One of the following filter types display:
• ipv6-mac
. F
iltering is based on both the IPv6 address and the MAC address.
• ipv6 addres
s. Filtering is based on the IPv6 address only.
IPv6 Address The IPv6 address of the interface.
MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is empty. If
port securit
y is disabled on the interface, the MAC Address field displays "permit-all."
VLAN The VLAN ID for the binding rule.
Format show ipv6 source binding {dhcp-snooping | static} {interface
<interface-id> | vlan <vlan-id>}
Mode Privileged EXEC