Utility Commands
448
ProSAFE M7100 Managed Switches
[unconfig_phase1]
[unconfig_phase2]
[terminate]
[suspend]
[resume]
[post_cfg]
dev usl_private_group_db_dump(0)
dev osapiDebugMallocSummary
show process cpu
show autoinstall
dev debugRmtSessionTraceSet(1)
dev debugConfigTraceFlagSet(4)
[member_leave]
show autoinstall
[member_join]
show autoinstall
[test]
clear config
debug dhcp packet
Use this command to display debug information about DHCPv4 client activities and trace
DHCPv4 packets to and from the local DHCPv4 client.
no debug dhcp
Use this command to disable the display of debug trace output for DHCPv4 client activity.
Default disabled
Format debug dhcp packet [transmit | receive]
Mode Privileged EXEC
Format no debug dhcp packet [transmit | receive]
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General