Management Commands
497
ProSAFE M7100 Managed Switches
A locally administered address must have bit 6 On (b'1') and bit 7 Off (b'0').
network mac-type
Use this command to specify whether the switch uses the burned in MAC address or the locally
administered MAC address.
no network mac-type
Use this command to reset the value of MAC address to its default.
network javamode
Use this command to specify whether the switch should allow access to the Java applet in the
header frame of the Web interface. When access is enabled, the Java applet can be viewed from
the Web interface. When access is disabled, the user cannot view the Java applet.
no network javamode
Use this command to disallow access to the Java applet in the header frame of the Web interface.
When acc
ess is disabled, the user cannot view the Java applet.
Format network mac-address <macaddr>
Mode Privileged EXEC
Default burnedin
Format network mac-type {local | burnedin}
Mode Privileged EXEC
Format no network mac-type
Mode Privileged EXEC
Default enabled
Format network javamode
Mode Privileged EXEC
Format no network javamode
Mode Privileged EXEC
To Next Page
Loading...
Need help?
General