Switching Commands
79
ProSAFE M7100 Managed Switches
lacp actor port priority
Use this command to configure the priority value assigned to the Aggregation Port. The valid
range for <priority> is 0–255.
Note: This command is only applicable to physical interfaces.
no lacp actor port priority
Use this command to configure the default priority value assigned to the Aggregation Port.
lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner. The
valid range for <key> is 0–65535.
Note: This command is only applicable to physical interfaces.
no lacp partner admin key
Use this command to configure the administrative value of the Key for the protocol partner.
Default 0x80
Format lacp actor port priority <priority>
Mode Interface Config
Format no lacp actor port priority
Mode Interface Config
Default 0x0
Format lacp partner admin key
Mode Interface Config
Format no lacp partner admin key <key>
Mode Interface Config
To Next Page
Loading...
Need help?
General