Switching Commands
156
ProSAFE M7100 Managed Switches
show forwardingdb agetime
This command displays the timeout for address aging.
show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If you enter the
command with no parameter, the entire table is displayed. You can display the table entry for one
MAC Address by specifying the MAC address as an optional parameter.
show mac-address-table stats
This command displays the Multicast Forwarding Database (MFDB) statistics.
Format show forwardingdb agetime
Mode Privileged EXEC
Term Definition
Address Aging
Timeout
This par
ameter displays the address aging timeout for the associated forwarding database.
Format show mac-address-table multicast <macaddr>
Mode Privileged EXEC
Term Definition
MAC Address A multicast MAC address for which the switch has forwarding and or filtering information.
The format is tw
o-digit hexadecimal numbers separated by colons, for example
01:23:45:67:89:AB. In an IVL system the MAC address will be displayed as a MAC address
and VLAN ID combination of 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end user. Dynamic
entries ar
e added t
o the table as a result of a learning process or protocol.
Component The component that is responsible for this entry in the Multicast Forwarding Database.
Pos
sible values are IGMP Snooping, GMRP, and Static Filtering.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Forwarding
Int
er
faces
The resultant forwarding list is derived from combining all the component’s forwarding
interfaces and removing the interfaces that are listed as the static filtering interfaces.
Format show mac-address-table stats
Mode Privileged EXEC
To Next Page
Loading...
