Utility Commands
383
ProSAFE M7100 Managed Switches
The following shows an example of CLI display output for the command.
(switch) #show mbuf total
mbufSize 9284 (0x2444)
Current Time 0x1897fa
MbufsFree 150
MbufsRxUsed 0
Total Rx Norm Alloc Attempts 26212
Total Rx Mid2 Alloc Attempts 4087
Total Rx Mid1 Alloc Attempts 188943
Total Rx High Alloc Attempts 384555
Total Tx Alloc Attempts 2478536
Total Rx Norm Alloc Failures 0
Total Rx Mid2 Alloc Failures 0
Total Rx Mid1 Alloc Failures 0
Total Rx High Alloc Failures 0
Total Tx Alloc Failures 0
show process app-list
This command lists the applications that are detected by the process manager. The list includes
core applications and any additional user applications.
The CLI display output might include the following information:
Format show process app-list
Mode Privileged EXEC
Term Definition
Id Application ID that is assigned by the process manager.
Name Application name.
Pid Application Linux process ID.
Admin-Status Flag indicating whether the application is administratively enabled.
Auto-Restart Flag indicating whether the process manager should automatically restart the application if
the applic
ation f
ails.
Running-Status Flag indicating whether the application is running.
To Next Page
Loading...
Need help?
General