NETGEAR ProSAFE M7100-24X - Debug Ip Pimdm Packet; Debug Ip Pimsm Packet

Utility Commands
453
ProSAFE M7100 Managed Switches
no debug ip mcache packet
Use this command to disable debug tracing of MDATA packet reception and transmission.
debug ip pimdm packet
Use this command to trace PIMDM packet reception and transmission. receive traces only
received PIMDM packets and transmit traces only transmitted PIMDM packets. When neither
keyword is used in the command, then all PIMDM packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface
on which the packet is received or transmitted is displayed on the console.
no debug ip pimdm packet
Use this command to disable debug tracing of PIMDM packet reception and transmission.
debug ip pimsm packet
Use this command to trace PIMSM packet reception and transmission. receive traces only
received PIMSM packets and transmit traces only transmitted PIMSM packets. When neither
keyword is used in the command, then all PIMSM packet traces are dumped. Vital information
such as source address, destination address, control packet type, packet length, and the interface
on which the packet is received or transmitted is displayed on the console.
Default disabled
Format debug ip mcache packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip mcache packet [receive | transmit]
Mode Privileged EXEC
Default disabled
Format debug ip pimdm packet [receive | transmit]
Mode Privileged EXEC
Format no debug ip pimdm packet [receive | transmit]
Mode Privileged EXEC