NETGEAR ProSAFE M7100-24X - Dot1 X User; Dot1 X Unauthenticated-Vlan; Clear Dot1 X Authentication-History

Security Commands
297
ProSAFE M7100 Managed Switches
dot1x unauthenticated-vlan
Use this command to configure the unauthenticated VLAN associated with that port. The
unauthenticated VLAN ID can be a valid VLAN ID from 0-Maximum supported VLAN ID (4093 for
7000 series). The unauthenticated VLAN must be statically configured in the VLAN database to
be operational. By default, the unauthenticated VLAN is 0, i.e. invalid and not operational.
no dot1x unauthenticated-vlan
This command resets the unauthenticated-vlan associated with the port to its default value.
dot1x user
This command adds the specified user to the list of users with access to the specified port or all
ports. The <user> parameter must be a configured user.
no dot1x user
This command removes the user from the list of users with access to the specified port or all
ports.
clear dot1x authentication-history
This command clears the authentication history table captured during successful and
unsuccessful authentication on all interface or the specified interface.
Default 0
Format dot1x unauthenticated-vlan <vlan id>
Mode Interface Config
Format no dot1x unauthenticated-vlan
Mode Interface Config
Format dot1x user <user> {<slot/port> | all}
Mode Global Config
Format no dot1x user <user> {<slot/port> | all}
Mode Global Config
Format clear dot1x authentication-history [slot/port]
Mode Global Config