NETGEAR ProSAFE M7100-24X - Spanning-Tree Bpdufilter; Spanning-Tree Bpdufilter Default; Spanning-Tree Bpduflood

Switching Commands
31
ProSAFE M7100 Managed Switches
spanning-tree bpdufilter
Use this command to enable BPDU Filter on an interface or range of interfaces.
no spanning-tree bpdufilter
Use this command to disable BPDU Filter on the interface or range of interfaces.
spanning-tree bpdufilter default
Use this command to enable BPDU Filter on all the edge port interfaces.
no spanning-tree bpdufilter default
Use this command to disable BPDU Filter on all the edge port interfaces.
spanning-tree bpduflood
Use this command to enable BPDU Flood on the interface.
Default disabled
Format spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format no spanning-tree bpdufilter
Mode Interface Config
Default disabled
Format spanning-tree bpdufilter
Mode Global Config
Default enabled
Format no spanning-tree bpdufilter default
Mode Global Config
Default disabled
Format spanning-tree bpduflood
Mode Interface Config