Utility Commands
388
ProSAFE M7100 Managed Switches
show version
This command displays inventory information for the switch.
Note: The show version command will replace the show hardware command in
future releases of the software.
Logging Commands
This section describes the commands you use to configure system logging, and to view logs and
the logging settings.
logging buffered
This command enables logging to an in-memory log that keeps up to 128 logs.
Format show version
Mode Privileged EXEC
Term Definition
Switch
Description
Text used to identify the product name of this switch.
Machine Type The machine model as defined by the Vital Product Data.
Machine Model The machine model as defined by the Vital Product Data
Serial Number The unique box serial number for this switch.
FRU Number The field replaceable unit number.
Manufacturer Manufacturer descriptor field.
Burned in MAC
Addr
es
s
Universally assigned network address.
Software Version The release.version.revision number of the code currently running on the switch.
Additional
P
ack
ages
The additional packages incorporated into this system.
Default disabled; critical when enabled
Format logging buffered
Mode Global Config
To Next Page
Loading...
