NETGEAR ProSAFE M7100-24X - Show Vlan; Show Vlan <Vlanid

Switching Commands
58
ProSAFE M7100 Managed Switches
no vlan association mac
This command removes the association of a MAC address to a VLAN.
show vlan
This command displays a list of all configured VLAN.
show vlan <vlanid>
This command displays detailed information, including interface information, for a specific VLAN.
The ID is a valid VLAN identification number.
Format no vlan association mac <macaddr>
Mode VLAN Config
Format show vlan
Mode • Privileged EXEC
• User EXEC
Term Definition
VLAN ID A VLAN Identifier (VID) is associated with each VLAN. The range of the VLAN ID is 1–4093.
VLAN Name A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric
charac
ters long, including blanks. The default is blank. VLAN ID 1 always has a name of
“Default.” This field is optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and
permanently defined), or Dynamic (one that is cr
e
ated by GVRP registration).
Format show vlan <vlanid>
Mode • P
rivileged EXEC
• User EXEC
Term Definition
VLAN ID A VLAN Identifier (VID) is associated with each VLAN. The range of the VLAN ID is 1–4093.
VLAN Name A string associated with this VLAN as a convenience. It can be up to 32 alphanumeric
charac
ters long, including blanks. The default is blank. VLAN ID 1 always has a name of
“Default.” This field is optional.
VLAN Type Type of VLAN, which can be Default (VLAN ID = 1) or static (one that is configured and
permanently defined), or Dynamic (one that is cr
e
ated by GVRP registration).
Interface Valid slot and port number separated by forward slashes. It is possible to set the parameters
for all por
ts by using the selectors on the top line.