NETGEAR ProSAFE M7100-24X - Network Port; Show Network Ipv6 Dhcp Statistics; Management Interface; Show Network Ipv6 Neighbors

Management Commands
578
ProSAFE M7100 Managed Switches
show network ipv6 neighbors
Use this command to display information about the IPv6 neighbor entries that are cached on the
network port.
The following CLI output is an example of the command output.
(Netgear Switch) #show network ipv6 neighbors
Neighbor Age
IPv6 Address MAC Address isRtr State (Secs) Type
------------------------ ----------------- ----- --------- ------ ------
FE80::5E26:AFF:FEBD:852C 5c:26:0a:bd:85:2c FALSE Reachable 0 Static
show network ipv6 dhcp statistics
Use this command to display the statistics of the DHCPv6 client running on the network
management interface.
Format show network ipv6 neighbors
Mode Privileged EXEC
Term Definition
IPv6 Address The IPv6 address of the neighbor.
MAC Address The MAC Address of the neighbor.
isRtr Shows if the neighbor is a router. If the output displays TRUE, the neighbor is a router; If the
output display
s F
ALSE, the neighbor is not a router.
Neighbor State The state of the neighbor cache entry. The possible values are: Incomplete, Reachable, Stale,
Delay, P
robe, and Unknown.
Age The time in seconds that has elapsed since an entry was added to the cache.
Type The type of neighbor entry. The type is Static if the entry is manually configured and Dynamic
if the entr
y is dynamic
ally resolved.
Format show network ipv6 dhcp statistics
Mode • P
rivileged EXEC
• User EXEC
Term Description
DHCPv6 Advertisement
Pack
ets Received
The number of DHCPv6 Advertisement packets received on the network interface.
DHCPv6 Reply Packets
Rec
eived
The number of DHCPv6 Reply packets received on the network interface.
Received DHCPv6
Adver
tisement Packets
Discarded
The number of DHCPv6 Advertisement packets discarded on the network
interface.