Management Commands
559
ProSAFE M7100 Managed Switches
show radius servers
Use this command to display the summary and details of a single or all RADIUS authenticating
servers configured for the RADIUS client.
Format show radius servers [<ipaddr> | <dnsname> | name [<servername>]]
Mode Privileged EXEC
Field Description
ipaddr The IP address of the authenticating server.
dnsname The DNS name of the authenticating server.
servername The alias name to identify the server.
Current The ‘*’ symbol preceding the server host address specifies that the server is currently
ac
tiv
e.
Host Address The IP address of the host.
Server Name The name of the authenticating server.
Port The port used for communication with the authenticating server.
Type Specifies whether this server is a primary or secondary type.
Current Host Address The IP address of the currently active authenticating server.
Secret Configured Yes or No Boolean value that indicates whether this server is configured with a secret.
Number of Retransmits The configured value of the maximum number of times a request packet is
r
e
transmitted.
Message Authenticator A global parameter to indicate whether the Message Authenticator attribute is
enabled or disabled.
Time Duration The configured timeout value, in seconds, for request retransmissions.
RADIUS Accounting
Mode
A global parameter to indicate whether the accounting mode for all the servers is
enabled or no
t
.
RADIUS Attribute 4
Mode
A global parameter to indicate whether the NAS-IP-Address attribute has been
enabled to use in R
ADIUS requests.
RADIUS Attribute 4
Value
A global par
ameter that specifies the IP address to be used in NAS-IP-Address
attribute used in RADIUS requests.
To Next Page
Loading...
Need help?
General