NETGEAR ProSAFE M7100-24X - Show Authorization Methods

Management Commands
537
ProSAFE M7100 Managed Switches
no authorization (console/telnet/ssh)
This command is used to remove command authorization from a line config mode.
show authorization methods
This command displays the configured authorization method lists.
Example:
(Switch) #show authorization methods
Command Authorization List Method
---------------------------- ------------------------------
dfltCmdAuthList none undefined undefined undefined
Line Command Method List
--------- ---------------------
Console dfltCmdAuthList
Telnet dfltCmdAuthList
SSH dfltCmdAuthList
Exec Authorization List Method
---------------------------- ------------------------------
dfltExecAuthList none undefined undefined undefined
Line Exec Method List
--------- ---------------------
Console dfltExecAuthList
Telnet dfltExecAuthList
SSH dfltExecAuthList
domain-name
Managed switch supports authentication based on domain name in addition to the username and
password. This command allows the switch to be configured in a domain. Users can enable or
disable domain functionality.
Format no authorization {commands| exec}
Mode • Line console
• Line telnet
• Line SSH
F
ormat show authorization methods
Mode Privileged EXEC